TempTale® Ultra Humidity: Temperature and Humidity Data Logger for Pharma, Produce and Warehouses

The **TempTale® Ultra Humidity** is a USB temperature and humidity data logger for shipments and storage where both conditions matter. It records temperature from -30°C to +70°C and relative humidity from 10–90% RH (non-condensing), shows current readings and alarms on a large LCD, and creates a secure PDF plus an encrypted raw file when plugged into a PC — with no extra software needed to open the PDF. This guide covers how the [TempTale® Ultra Humidity](https://royalkana.com/product/temptale-ultra-humidity) works, where humidity excursions matter, how it compares with other dual-channel and temperature-only loggers, and how to order it from Dubai.

What the TempTale® Ultra Humidity is

The [TempTale® Ultra Humidity](https://royalkana.com/product/temptale-ultra-humidity) is part of the Sensitech TempTale® Ultra family. It monitors both temperature and relative humidity for Life Sciences packaging, produce, devices and warehouse storage.

• Temperature range: -30°C to +70°C; accuracy ±0.5°C from -10°C to +45°C, ±1.0°C outside that band; resolution 0.1°
• Humidity: 10–90% RH non-condensing; accuracy ±3% RH from 20–80% RH, ±5% RH at the edges; resolution 0.1% RH
• Memory: 32,000 points (16,000 temperature / 16,000 humidity)
• Thin housing: about 108 × 50.2 × 15.2 mm, ~60 g
• Large LCD: status, alarm, trip statistics, current temperature and RH
• USB: automatic secure PDF plus encrypted raw file; no extra software required to open the PDF
• Recording options: Single Use, Single Use Overwrite and Multi Use
• Alarms: up to high/low temperature and high/low humidity; programmable sample interval 30 seconds to 120 minutes; start delay 0–24 hours
• 3-point NIST® traceable Certificate of Calibration
• Supports FDA 21 CFR Part 11 / EC Annex 11 workflows via TTMD / ColdStream; IATA DGR — no dangerous-goods label required
• 12 months operating life / non-replaceable 3.6 V coin cell

Why temperature alone is not enough

Many lanes are specified only on temperature, but humidity still damages the product. Moisture can soften blister packs and cartons, fog labels, encourage mould on produce, and affect sensors or electronic devices. A temperature-only logger will show a green trip even when RH went far outside the packing or storage limit.

Common humidity-sensitive cases include:

• **Pharma packaging integrity:** cartons, foils and secondary packs that absorb moisture or dry out in long air freight or warehouse dwell
• **Fresh produce and perishables:** wilting, condensation and mould risk when RH drifts outside the produce band — see our guide to [temperature and humidity monitoring for fresh produce in transit](https://royalkana.com/blog/temperature-humidity-monitoring-fresh-produce-transit)
• **Devices and diagnostics:** humidity-sensitive electronics, test kits and medical devices that need a dual-channel record for release
• **Validated shippers and warehouses:** proving both temperature and RH stayed in range for lane qualification and storage audits

If your SOP or customer release checklist asks for RH as well as temperature, a dual-channel logger such as the TempTale® Ultra Humidity avoids a second device and a second download.

LCD and USB/PDF workflow for receivers abroad

On export lanes the cargo often changes hands: forwarder, airline, customs, 3PL and the final warehouse or pharmacy. Each hand-off may need a quick accept or reject decision. The TempTale® Ultra Humidity supports that without installing software at every site:

• **The LCD shows status, alarm and current T/RH** so the dock team can decide on the spot
• **USB creates a secure PDF automatically**, so the receiver opens the report in a normal PDF reader
• **An encrypted raw file** is written alongside the PDF for deeper review in TTMD / ColdStream when Part 11 or Annex 11 controls apply
• **High/low temperature and humidity alarms** can be programmed before the trip, with a start delay of up to 24 hours and sample intervals from 30 seconds to 120 minutes

For refrigerated pharma lanes that are mainly about the 2–8°C window, also read [how to choose a 2–8°C data logger](https://royalkana.com/blog/how-to-choose-temperature-data-logger-2-8c-pharma). For what a calibration certificate should contain, see [NIST-traceable calibration certificates](https://royalkana.com/blog/data-logger-calibration-nist-traceable-certificates).

Where to use it

• **Pharma packaging and secondary packs** that need a dual temperature/humidity record for release and complaint investigation
• **Produce and perishable export** where RH control is as important as temperature
• **Warehouses, cold rooms and staging areas** that store humidity-sensitive stock between flights or truck legs
• **Validated shippers and lane studies** that must document both channels for IQ/OQ/PQ or customer qualification
• **Export lanes from Dubai** into the GCC, India, Türkiye, Europe and the US, where receivers abroad need a PDF they can open without proprietary tools

Ultra Humidity vs TempChrome Elite TH vs temperature-only Ultra models

Royal Kana stocks several ways to monitor temperature and humidity. Pick by validation need, reporting and whether humidity is required at all.

• **Validated dual-channel USB/PDF with LCD and Part 11-alignable raw file:** the [TempTale® Ultra Humidity](https://royalkana.com/product/temptale-ultra-humidity)
• **Cost-sensitive dual-channel single-use PDF/CSV for produce or simpler lanes:** the [TempChrome Elite TH](https://royalkana.com/product/tempchrome-elite-th)
• **Temperature only, simplest USB/PDF export logger:** the [TempTale® Ultra Fit](https://royalkana.com/product/temptale-ultra-fit)
• **Temperature only, single trip or reusable:** the [TempTale® Ultra Single Use](https://royalkana.com/product/temptale-ultra-single-use) or [TempTale® Ultra Multi Use](https://royalkana.com/product/temptale-ultra-multi-use)

For a wider family comparison, read [TempTale® vs TempChrome: which data logger for your lane](https://royalkana.com/blog/temptale-vs-tempchrome-which-data-logger).

Ordering the TempTale® Ultra Humidity from Dubai

Royal Kana General Trading LLC has been selling Sensitech monitoring products in the Middle East for 8 years. We hold TempTale® stock in Dubai and ship to the UAE, Saudi Arabia and the wider GCC, and on export lanes to India, Türkiye, Europe and the US. Many of our clients have worked with us for 8 years or more. Our team takes calls 24/7, and inside the UAE we can send a driver for urgent orders. Tell us your lane, trip length, temperature and humidity limits, recording option and monthly volume, and we will quote the right configuration.

Request a quote on the [TempTale® Ultra Humidity product page](https://royalkana.com/product/temptale-ultra-humidity), or browse all [temperature data loggers](https://royalkana.com/category/data-logger).

Need help with your cold chain setup? Contact Royal Kana.