TempTale® Ultra Probe: Detachable Probe Temperature Data Logger for Shippers, Fridges and Customs Checks

The **TempTale® Ultra Probe** is a USB temperature data logger with a detachable 1.5 m probe. The probe sits next to the product inside the shipper, fridge or freezer, while the monitor and its LCD stay outside. Receivers, customs officers and warehouse teams can read the alarm status and download the data without opening the carton or the refrigerator door. This guide explains how the [TempTale® Ultra Probe](https://royalkana.com/product/temptale-ultra-probe) works, where it fits better than a standard logger, and how to order it from Dubai.

What the TempTale® Ultra Probe is

The [TempTale® Ultra Probe Monitor](https://royalkana.com/product/temptale-ultra-probe) is part of the Sensitech TempTale® Ultra family. It records in-transit and storage temperatures for Life Sciences and food products through an external ambient probe.

• Probe and monitor range: -30°C to +70°C
• Detachable probe, 1.5 m (about 5 ft) long
• 16,000 data points (16K) in non-volatile flash memory
• Direct USB connection to a PC, with no proprietary reader or adapter
• Configurable PDF report with selectable time zones and languages
• IP64 water-resistant housing
• Matching serial numbers on the monitor and the probe
• 3-point NIST® traceable Certificate of Calibration and a validation manual
• Available in Single Use, Single Use Overwrite and Multi Use recording options

Why a detachable probe matters

With a standard logger, the device sits inside the box. To check it, someone has to open the box. Every opening lets warm air in and breaks the packing configuration that was validated.

With the TempTale® Ultra Probe, only the thin probe cable goes inside. The monitor stays on the outside of the shipper or fridge, so:

• **The probe stays close to the product** for the whole trip, which gives a more stable and more representative reading
• **The LCD shows key indicators outside the package**, so the dock team can make an accept or reject decision on the spot
• **Supply-chain partners can disconnect and reconnect the probe** to check data and alarm status without opening the carton
• **USB download happens outside the box**, so nobody has to unpack the load to get the PDF report

Customs inspections and long hand-off chains

On many export lanes the cargo changes hands several times: forwarder, airline, customs agent, 3PL warehouse, distributor and finally the pharmacy or hospital. Each of them may want to see the temperature record. The detachable probe lets each partner check the logger without disturbing the product. That is why it is a common choice on lanes where customs agents inspect temperature data, such as shipments into Saudi Arabia that fall under SFDA requirements.

The matching serial numbers on the probe and monitor help prevent mix-ups when several shipments are checked at the same dock.

Where to use it

• **Insulated shippers:** the probe goes inside the payload area of a passive box such as [TempLink Pro](https://royalkana.com/product/templink-pro), with the monitor taped outside
• **Pharmacy and clinic refrigerators:** monitor a 2–8°C fridge without opening the door to read it
• **Freezers and cold rooms:** place the probe among the stock and keep the monitor on the wall outside
• **Reefer containers and trucks:** route the probe to the load while the driver or receiver reads the LCD

For very low temperatures, the probe range of -30°C is not enough. Use the [TempTale® Ultra Dry Ice Probe](https://royalkana.com/product/temptale-ultra-dry-ice-probe) instead. Its probe reads from -95°C to +30°C and comes in 1 m and 3 m lengths. Our guide to [monitoring dry ice shipments below -70°C](https://royalkana.com/blog/dry-ice-shipping-monitoring-below-70c) covers that case.

TempTale® Ultra Probe vs other TempTale® Ultra models

• **Logger can travel inside the box and nobody needs to read it before arrival:** the [TempTale® Ultra Single Use](https://royalkana.com/product/temptale-ultra-single-use) or the reusable [TempTale® Ultra Multi Use](https://royalkana.com/product/temptale-ultra-multi-use)
• **Receiver may have no software and you want the simplest USB/PDF export logger:** the [TempTale® Ultra Fit](https://royalkana.com/product/temptale-ultra-fit)
• **Temperature must be read without opening the carton, fridge or freezer:** the [TempTale® Ultra Probe](https://royalkana.com/product/temptale-ultra-probe)
• **Dry ice or ultra-low temperature:** the [TempTale® Ultra Dry Ice Probe](https://royalkana.com/product/temptale-ultra-dry-ice-probe)

If you are still deciding between single-trip and reusable loggers, read [single-use vs multi-use temperature data loggers](https://royalkana.com/blog/single-use-vs-multi-use-temperature-data-loggers-pharma-export-dubai). For alarm settings on refrigerated pharma lanes, see [how to choose a 2–8°C data logger](https://royalkana.com/blog/how-to-choose-temperature-data-logger-2-8c-pharma). For calibration paperwork, see [NIST traceable calibration certificates](https://royalkana.com/blog/data-logger-calibration-nist-traceable-certificates).

Ordering the TempTale® Ultra Probe from Dubai

Royal Kana General Trading LLC has been selling Sensitech monitoring products in the Middle East for 8 years. We hold TempTale® stock in Dubai and ship to the UAE, Saudi Arabia and the wider GCC, and on export lanes to India, Türkiye, Europe and the US. Many of our clients have worked with us for 8 years or more. Our team takes calls 24/7, and inside the UAE we can send a driver for urgent orders. Tell us your lane, trip length, temperature range and monthly volume, and we will advise the right recording option.

Request a quote on the [TempTale® Ultra Probe product page](https://royalkana.com/product/temptale-ultra-probe), or browse all [temperature data loggers](https://royalkana.com/category/data-logger).

Need help with your cold chain setup? Contact Royal Kana.